Podolsk,
14 Lobacheva st.
To contact page
RU EN
Tue-Fri 11:00-20:00
Sat-Sun 11:00-17:00
Mon - Closed
T-BAR TYSON XL
Oversized T bar handlebar
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL
T-BAR TYSON XL

  • T-bar handlebar with oversized uprights and center crossbar section. Standard 25.4 mm diameter at the controls.
  • Finish: gloss black or chrome.
  • The right end of the handlebar tube can have a straight cut (for a cable throttle) or a special cut (for an electronic throttle).
  • Read how to choose handlebars and risers on the Stuntex forum.

RUB 48,000 RUB 43,600

The Tyson XL is a classic oversized T-bar: the uprights and center section are made of larger-diameter tubing. This makes the handlebar stronger and visually "beefier". The ends are standard diameter — for stock Harley-Davidson controls.

Thanks to its classic T-bar construction, the Tyson XL is exceptionally stiff and strong. Combined with 4130 chromoly steel, this makes it one of the toughest handlebars in its class.

The handlebar is available in several heights in 2 inch increments, so you can choose a Tyson XL to suit your ergonomics and riding style.

The massive 1-1/4” outside diameter uprights have TIG-welded mounting bosses on 3.5” centers, compatible with a wide range of stock Harley triple trees and similar aftermarket triple trees.

  • The tapered, reinforced crossbar has a 1-1/8” (28.6 mm) outside diameter center section and standard 1” (25.4 mm) diameter grip ends.
  • The uprights are made of 1-1/4” outside diameter tubing with a 0.120” (3 mm) wall.
  • Constructed entirely of seamless 4130 chromoly steel, TIG-welded throughout.
  • The threaded mounting bosses are CNC-lathed and accept 1/2-13 t.p.i. hardware.
  • Bends are formed by CNC mandrel bending for perfectly even ergonomics and all-day riding comfort.
  • CNC-machined slots at the grip ends and at the bottom of the riser tubes allow internal wiring.
  • Available finishes: black electroplated and mirror chrome.
  • Available heights: 8”, 10”, 12” and 14”.
  • Available slotted for stock Harley-Davidson controls or TBW for the Harley Throttle-By-Wire module.
  • The TBW version has a 1” outside diameter and a 20.9 mm inside diameter at the grip ends.
  • The slotted version has a 1” outside diameter and a 19.4 mm inside diameter at the grip ends.
  • The right end of the handlebar has a cutout for the internal H-D TBW module.
  • Technischer Überwachungsverein, or TüV, in Germany is an independent laboratory that tests fatigue strength, manufacturing quality and installation compatibility for a wide range of consumer products, with a particular focus on automotive and motorcycle components and accessories. TüV-approved Biltwell handlebars and risers are among the strongest and most thoroughly tested motorcycle parts in the world.
Recommend
Magazine Wheelie: Trick Theory Magazine ZX636 03-04 Stunt Bike Build Stunt Show with Girls Baldini Stunt Show