Casual style and protective features make the Ageless Riding Shoes a great choice for any urban rider. With a modern silhouette, the Ageless shoes feature integrated ankle protection, while the high-quality, durable OrthoLite® insole provides increased comfort and breathability. The sole construction is based on the latest advanced Alpinestars urban footwear developments to deliver ideal everyday comfort with a high level of protection thanks to the Alpinestars Transverse Protection Frame (TPF), which is built with internal metal rods for increased strength.
Use a mild suede/leather cleaner only on the leather parts on the outside of the boots. Safe cleaners for genuine leather can be found at most shoe repair shops or branded leather goods stores. To clean other outer parts of the boot (buckles, overlays or sole), wipe them with a cloth dampened with clean water. Please note: even after using mild, safe leather cleaners, the leather on your boots may darken. So always test each new cleaner on an inconspicuous area to avoid unpleasant surprises. Do not use solvents or other aggressive substances to clean the boots. Do not use hair dryers or other heaters to dry the boots after cleaning.
Regularly treat the outer leather parts of the boots with a quality conditioner that is safe for genuine suede/leather. Apply the genuine suede/leather conditioner only to the leather areas. Do not apply leather conditioner to the inside of the boot, zippers, hook-and-loop surfaces or sole. Safe cleaners for genuine leather/suede can be found at most shoe repair shops or branded leather goods stores.
Store your boots in a dry, well-ventilated place, away from direct sunlight and other sources of heat. Make sure nothing can crush, crease or damage them, and do not place heavy objects on them. When storing the boots, make sure their weight does not rest on a few separate points but is distributed as evenly as possible. If the boots are damp after use, dry them in a ventilated room at room temperature before storing them; do not use hair dryers or other heaters to speed up the process.
When transporting the boots, do not leave them in a closed car for long periods, and make sure they are not exposed to excessively high or low temperatures. Make sure they cannot be crushed, hit, creased or otherwise mechanically damaged, and that no heavy objects are placed on them during transport.
Icon® motorcycle boots are considered personal protective equipment (PPE) under Regulation (EU) 2016/425. All Icon protective footwear is Category 1 or 2 PPE, so the CE marking may be applied to it only after obtaining a CE certificate of conformity and subsequent certification by an EU notified body. The CE marking on protective footwear indicates compliance with the essential health and safety requirements of Regulation (EU) 2016/425.
All Icon motorcycle boots have passed EU type-examination testing at the notified body Ricotest Srl 0498 for compliance with Regulation (EU) 2016/425. In addition, they have been inspected and tested for compliance with the technical standard EN 13634:2017 “Protective footwear for motorcycle riders — requirements and test methods”.
Icon motorcycle boots may be used only for riding road motorcycles. The boots are designed to provide limited protection only in certain circumstances. The boots are intended for use only as motorcycle boots. The boots are intended for use in combination with other protective equipment. Using the boots in addition to any other PPE or motorcycle riding gear does not mean that such PPE or riding gear complies with CE standards. Motorcycling is dangerous, so using the boots cannot prevent injury or death. For additional protection when riding a motorcycle, Icon® strongly recommends always using several mutually compatible PPE items, including a certified motorcycle helmet, a motorcycle jacket with shoulder and elbow impact protection, certified back protection, motorcycle pants with certified knee, shin and hip impact protectors, motorcycle gloves and certified motorcycle boots.
Below are the CE markings on the boots in accordance with Regulation (EU) 2016/425 and EN 13634:2017.
CE
The CE marking means that this protective footwear complies with the applicable requirements of Regulation (EU) 2016/425.
Open book pictogram
Pictogram indicating that a user manual (information sheet) is supplied with this product.
Motorcyclist pictogram
Special symbol indicating that the protective footwear is intended for motorcycle riding only.
EN 13634
Technical standard
EN 13634:2017 Level X1 X2 X3 X4 IPA IPS WR FO SRA SRB SRC WAD B
Performance level of the protective footwear according to EN 13634:2017.
X1 is the height of the upper: level 1 or level 2.
X2 is the abrasion resistance of the upper: level 1 or level 2.
X3 is the cut resistance of the upper: level 1 or level 2.
X4 is the transverse rigidity of the footwear: level 1 or level 2.
IPA: the footwear meets the additional requirements for ankle impact protection.
IPS: the footwear meets the additional requirements for shin impact protection.
WR: the footwear meets the additional requirements for resistance to water penetration.
FO: the footwear meets the additional requirements for resistance to fuel and oil.
SRA, SRB or SRC: the footwear meets the additional requirements for slip resistance.
WAD: the insoles meet the requirements for water absorption and desorption.
B: the footwear meets the requirements for water vapour permeability of the upper.
Choosing the right size:
Men’s boot sizes
| EU | 39 | 41 | 42 | 43 | 43.5 | 44 | 44.5 | 45 | 45.5 | 46 | 47 | 48.5 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| US | 7 | 8 | 8.5 | 9 | 9.5 | 10 | 10.5 | 11 | 11.5 | 12 | 13 | 14 |
| UK | 6.5 | 7.5 | 8 | 8.5 | 9 | 9.5 | 10 | 10.5 | 11 | 11.5 | 12.5 | 13.5 |
For maximum protection, PPE must be worn so that it securely covers vulnerable areas of the body. If the PPE design includes protective features, it must fit the user correctly for the PPE to be positioned properly. PPE must be fitted with special adjusters for a precise fit to the body.
The fit of protective footwear on the foot is very important. The fit of different types of protective footwear varies depending on design and construction. Wear only protective footwear of the right size. Do not use protective footwear that does not fit your foot properly. Make sure the protective footwear fits snugly but not too tightly. Make sure heel lift is minimal. Make sure the toe does not pinch.
If the Icon boots are equipped with the BOA® lacing system.
Tightening the laces:
Press the system dial on the boot tongue and push it down toward the foot to unlock the lacing system. Turn the dial clockwise to tighten the lacing system to the desired level.
Loosening the laces:
Pull the system dial toward you and up away from the foot to release the lacing tension. To put the boots on, loosen the laces and insert your foot. Push your foot all the way down into the boot. Make sure the boot fits comfortably. The boot should fit snugly but not too tightly. The length of your foot should match the length of the boot; it should not be much shorter or longer. Tighten the laces to achieve the desired fit. The footwear must not impair blood circulation in the foot. If the boot is too tight, you can loosen the lacing system and retighten it to achieve the right fit. Make sure the boot fits snugly but not too tightly, does not impair circulation and does not restrict freedom of movement.
Make sure the boots do not interfere with operating the motorcycle.
For maximum protection and safety, protective footwear must not cause discomfort or restrict the rider’s freedom of movement, or prevent access to and use of the motorcycle controls in the normal riding position. If you cannot find comfortable protective footwear of this type, use another type of CE-certified protective footwear.
BEFORE EACH USE
Make sure the sole is in good condition and securely attached to the boot. Make sure the linings are not torn. Check the upper of the boot for cuts, cracks and scuffs. Make sure the BOA® lacing system works properly. Protective footwear that is not securely fastened cannot provide protection. If the protective footwear or any of its parts are worn, replace the footwear immediately.
IN THE EVENT OF AN IMPACT OR CRASH
In the event of an impact or crash, key parts of the protective footwear may be damaged, and the footwear may no longer provide limited protection against the impacts described in the “Prohibitions and limitations of use”, “Performance” and “Protection limitations” sections. Damage may not be visible on simple visual inspection. In the event of an impact or crash, the boots should be replaced.
TWO-YEAR RULE
As a rule, lightweight PPE such as motorcycle boots should be replaced every two years, even if there is no visible damage. Damage may not be visible on simple visual inspection.
Icon motorcycle boots have passed EU testing for compliance with Regulation 2016/425. In addition, they have been inspected and tested for compliance with the appropriate technical standard.
The European standard EN 13634:2017 provides for two levels of protection depending on the protective features. The level of risk or danger a rider may face is closely related to their riding style and the type of crash. According to EN 13634:2017, protection level 1 is considered the minimum level required for effective protection in a crash. Footwear of this level provides an optimal level of comfort for any riding style. If the rider’s riding style or sport involves increased risk, it is recommended to use level 2 protective equipment with a higher level of protection. However, stronger protection means heavier gear and less comfort, so this level is not suitable for every rider.
Type tests of motorcycle boots under EN 13634:2017 are shown in Table 2 (consisting of three parts):
Table 2, part 1. All footwear: height of the upper (EN 13634:2017, clause 4.2.1; mm; see Fig. 1)
| Size (EU) | Level 1: H2 ≥ | Level 1: H1 ≥ | Level 2: H2 ≥ | Level 2: H1 ≥ |
|---|---|---|---|---|
| 36 and below | 103 | 64 | 162 | 113 |
| 37–38 | 105 | 66 | 165 | 115 |
| 39–40 | 109 | 68 | 172 | 119 |
| 41–42 | 113 | 70 | 178 | 123 |
| 43–44 | 117 | 72 | 185 | 127 |
| 45 and above | 121 | 73 | 192 | 131 |
H1 and H2 are defined in Fig. 1.
Table 2, part 2. Upper
| Test | Standard | Unit | Requirement |
|---|---|---|---|
| Abrasion resistance | EN 13634:2017, clause 4.4.4 | s | Area A (Achilles tendon and instep): level 1 ≥ 1.5 s, level 2 ≥ 2.5 s. Area B (rest of the upper): level 1 ≥ 5 s, level 2 ≥ 12 s. The test results for the upper are classified on the basis of the lowest result obtained in area A or B. Areas A and B are defined in Fig. 2 and Table 3. |
| Cut resistance | EN 13634:2017, clause 5.4.4 | mm | Area A (Achilles tendon and instep): level 1 maximum knife penetration ≤ 25 mm, level 2 maximum knife penetration ≤ 25 mm. Area B (rest of the upper): level 1 maximum knife penetration ≤ 25 mm, level 2 maximum knife penetration ≤ 15 mm. The test results for the upper are classified on the basis of the lowest result obtained in area A or B. Areas A and B are defined in Fig. 2 and Table 3. |
Table 2, part 3. Sole and whole boot
| Test | Standard | Unit | Requirement |
|---|---|---|---|
| Sole: transverse rigidity of the footwear | EN 13634:2017, clause 4.8 | kN | Level 1: ≥ 1.0 kN Level 2: ≥ 1.5 kN |
| Boot: resistance to water penetration | EN 13634:2017, clause 5.2 | Must comply with EN ISO 20345:2011, clause 6.2.5 | |
| Boot: slip resistance of the sole | EN 13634:2017, clause 5.4 | Surface: ceramic tile. Lubricant: SLS. A) heel mode (7°) ≥ 0.28 B) flat mode ≥ 0.32 |
Fig. 2. Key
| Designation | In the figure |
|---|---|
| Zone 1, shin area | 1 |
| Zone 2, ankle area | 2 |
| Zones F and G | See Table 3 |
| Area A | Shaded grey |
| Area B | Not shaded |
Table 3. Measurements for the areas shown in Fig. 2
| Size (EU) | Size (UK) | F, minimum (mm) | G, maximum (mm) |
|---|---|---|---|
| 38 and below | 5 and below | 40 | 120 |
| 39–42 | 5.5–8 | 50 | 125 |
| 43 and above | 8.5 and above | 55 | 130 |
The lower edge of Zone 2 is used to define the lower limit of measurements F and G. Zone 2 is located at the central point X above the natural centre of the ankle, according to the position of the foot in the boot.
GENERAL INFORMATION ON USE:
Icon motorcycle boots protect the user from external conditions without impairing their ability to operate the motorcycle’s foot controls. The boots were designed with the need to ensure safety while preserving freedom of movement in mind. Motorcycle boots are considered PPE because they are designed to provide limited protection of the foot and ankle in the event of a crash or fall from a motorcycle.
Additional dangers in road accidents involving a motorcycle may come from impacts with the motorcycle and collisions with other vehicles and objects on the road.
The likelihood of serious injury increases if the leg becomes trapped under the motorcycle while sliding. Motorcycle boots do not prevent injuries caused by heavy impacts, severe bending, twisting, torsion or crushing from hitting an object, injuries caused by very sudden movements, or extensive penetrating injuries. The forces used in testing cannot be directly compared with the forces riders are exposed to in real crashes, so products that meet EN 13634:2017 can only reduce the severity of some injuries.
No protective footwear can provide complete protection against all injuries. The principle is to create a product that helps reduce the risk of injury to the area this PPE was designed to protect.
MISUSE THAT IMPAIRS BOOT PERFORMANCE:
To provide protection, the boots must be worn. Misuse of the boots can seriously impair their effectiveness and performance. For the boots to retain their original protective properties, use them only for the purposes described in the “Prohibitions and limitations of use” section of this user manual. Do not modify any boot components. Never bend or twist the boots excessively, as they are not designed for this. Do not paint the boots or use dyes of any kind.
ENVIRONMENTAL CONDITIONS THAT IMPAIR BOOT PERFORMANCE:
Contamination with foreign substances and/or improper care can significantly impair the effectiveness and performance of the boots. Do not expose the boots to extremely intense direct sunlight or extremely high humidity. Do not expose the boots to very high or low temperatures, such as in a closed car or when stored outdoors.
RELEASE OF THE MANUFACTURER FROM LIABILITY BY THE PRODUCT OWNER:
NO PERSONAL PROTECTIVE EQUIPMENT CAN PROVIDE PROTECTION AGAINST ALL TYPES OF IMPACTS. NO PERSONAL PROTECTIVE EQUIPMENT CAN PROVIDE COMPLETE PROTECTION AGAINST ALL TYPES OF INJURIES. MOTORCYCLING IS DANGEROUS, AND USING THIS GEAR CANNOT PREVENT INJURY OR DEATH. BY USING THIS GEAR, THE USER ASSUMES ALL RISKS ASSOCIATED WITH THIS ACTIVITY THAT MAY RESULT IN INJURY OR DEATH. THE USER HEREBY WAIVES ALL CLAIMS AND LAWSUITS AGAINST ICON® (A DIVISION OF LEMANS CORPORATION) AND LEMANS CORPORATION IN THE EVENT OF DEATH OR INJURY RESULTING FROM THE USE OF ICON® PRODUCTS.
When choosing motorcycle footwear size remotely, we recommend going by the insole length and comparing it with your own footwear, preferably stiff boots with a blunt toe. We don’t recommend comparing with soft sneakers, as they may be tight or slightly small yet feel comfortable thanks to the stretchy mesh upper. Motorcycle footwear is stiff and doesn’t stretch like sneakers.
The table below shows the overall insole dimensions in millimeters, which we measure ourselves with a tape measure. [A] is the insole length, [B] is the maximum width.
This is the Alpinestars Ageless insole from the side: the heel cup is curved and raised, so the length your foot actually rests on is slightly shorter than the overall length [A].
On our forum we share experience of choosing motorcycle footwear sizes remotely.
Scroll the table sideways to see all sizes.
| US size | 7 | 8 | 8.5 | 9 | 9.5 | 10 | 10.5 | 11 | 11.5 | 12 | 13 | 14 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| EC size | 39 | 40,5 | 41 | 42 | 42,5 | 43 | 43,5 | 44 | 45 | 45,5 | 47 | 48 |
| A, mm | — | 268 | 271 | 278 | 280 | — | 290 | — | 299 | 302 | 310 | — |
| B, mm | — | 90 | 90 | 92 | 92 | — | 94 | — | 97 | 98 | 100 | — |