Podolsk,
14 Lobacheva st.
To contact page
RU EN
Tue-Fri 11:00-20:00
Sat-Sun 11:00-17:00
Mon - Closed
Field Armor Compression Elbow
Compression motorcycle elbow guards
Field Armor Compression Elbow
Field Armor Compression Elbow
Field Armor Compression Elbow
Field Armor Compression Elbow
Field Armor Compression Elbow
Field Armor Compression Elbow
RUB 10,300

The Field Armor™ protective compression sleeve consists of a stretch polyester mesh chassis, DuPont™ Kevlar® fiber reinforcements and D3O® protective inserts. Designed to be worn under your regular jacket, the elbow guards provide the extra protection specifically needed when riding a motorcycle.

FIT

  • Snug fit.

MATERIAL

  • A chassis of high-tech moisture-wicking Hydradry material follows the contours of your body, helping to reduce friction and chafing while providing an excellent range of motion.

PROTECTION

  • External flexible thermoplastic sliders and internal D3O® cushioning elements.

General care recommendations

ICON® motorcycle protection is tough and designed to withstand harsh contact with asphalt, but no protection can survive every possible motorcycle crash. If you crash in Icon protection, carefully inspect it for signs of structural damage (heavily abraded areas, holes, damaged seams, etc.). If there is damage, or if you are not sure whether the damage is structural, the protection must be replaced. Most Icon protection uses a coating over the textile base that reinforces the overall fabric matrix. Improper cleaning can compromise the integrity of this coating, leading to breakdown of the base material and reduced protective properties.

Do not expose the protection to excessive sunlight and ultraviolet radiation. This is most important when storing it. Always store the protection in a dark, well-ventilated place. It is best to store it on a regular wardrobe hanger with wide, padded shoulders. Do not wrap the protection in plastic or other non-porous materials, as this may discolor the fabric or plastic. Finally, avoid exposing the protection (or any other riding gear) to gasoline fumes or any other aggressive chemicals. These fumes harm the structure of nylon and polyester fabrics, reducing their inherent protective properties.

Cleaning

Hand wash the textile areas of the protection in warm water with a mild liquid detergent. Hand washing keeps unnecessary friction on the garment to a minimum. A soft-bristle toothbrush is great for removing the remains of small flying insects that hit the protection and road dust. After washing, rinse the protection in clean water until all detergent is removed. DO NOT use oxygen-based detergents, bleach, fabric softeners, conditioners or dry cleaning products. Using these products can damage the garment!

Drying

DO NOT use a tumble dryer. Tumble drying will damage both the garment and possibly the dryer itself. The only recommended drying method is to take the garment out of the water, let the water drain, gently squeeze it by hand without wringing and place it on a drying rack. While drying, do not expose the protection to direct sunlight or use a hair dryer or heaters to speed up the process. DO NOT iron any part of the garment.

D3O® is the number one choice for motorcycle body armor and protective gear that delivers outstanding impact protection, comfort and flexibility. From MotoGP, to off-road and the street, our innovative range of CE Level 1 and Level 2 certified products are trusted and sold worldwide by leading motorcycle brands.

HOW DOES MOTORCYCLE ARMOR WORK?

Motorcycle armor works by absorbing the shock from an impact. Rather than the impact striking your body with full force, motorcycle armor helps take the brunt of the impact and dissipate the force to reduce its severity. The impact protection material found in motorcycle armor is what makes this possible, and the materials used in and around the armor (such as leather in a jacket, or woven kevlar in motorcycle pants) help to resist abrasion.

D3O® motorcycle armor offers the most advanced impact protection available on the market. Based on non-Newtonian principles, D3O® materials are soft and flexible in their resting state, but stiffen under an impact to disperse the energy of the force across the surface area of the product. D3O® armor is durable and designed to withstand multiple impacts, only needing to be replaced when showing wear and tear. This is in contrast to other armor which can flatten out over time, quickly losing its ability to protect effectively.

The design of motorcycle armor is also key to ensure it gives maximum levels of protection and comfort. Each piece of D3O® armor is designed to fit specific parts of the body comfortably, including the back, chest and limbs, such as knees and elbows. This gives these areas optimum coverage and reduces the likelihood of injury.

WHAT EN NUMBERS TO LOOK FOR ON MOTORCYCLE ARMOR?

When looking at your D3O® impact protection or the label in your motorcycle armor, you're likely to see EN (European Norm) numbers. EN standards are used to help demonstrate that a product meets the requirements of the PPE Regulation (EU) 2016/425 or PPE Regulation (2016/425) as brought into UK Law and amended.

  • D3O® Ghost™, LP1 and LP2 are CE/UKCA certified in accordance with EN1621-1:2012.
  • D3O® Viper Stealth, Central and Pro Back protectors are certified in accordance with EN1621-2:2014.
  • D3O® knuckle protection is tested to EN13594:2015.
  • D3O® Ankle protection is certified in accordance with EN 13634:2015.
  • The D3O® CP1 Chest Protector and Racing Chest Protector are certified in accordance with EN1621-3:2018.

EN1621 relates specifically to motorcycle armor. EN1621-1:2012 relates to limb protection, EN1621-2:2014 to back protection, and EN1621-3:2018 to chest protection. All of these can be tested to meet Level 1 or Level 2 protection. Level 1 offers a good level of impact protection, and Level 2 meets the criteria for racing, and can therefore withstand higher force impacts.

EN13594:2015 is specific to motorcycle glove protection. To pass, the product must meet the following criteria: Innocuousness, ergonomic requirements, sizing and cuff length, restraint, tear strength, seam strength, impact abrasion resistance, cut resistance, and impact protection of knuckles.

EN13634:2015 applies to motorcycle footwear. The criteria that need to be met include: protection, ergonomic characteristics, innocuousness, mechanical properties, marking and information for users.

Whole garment testing is reviewed against EN 17092:2020. This is separate from the EN standards indicated above. While impact protection is necessary to meet EN 17092:2020, the armor also needs to be tested on its own to ensure it's fit for purpose and meets Level 1 or Level 2 requirements.

EN17092 is tested to 5 levels of criteria. The testing looks at the different zones on the body and how well the armor protects those areas under force. Garments certified to EN17092 and featuring D3O® impact protection are therefore some of the safest and most well-tested motorcycle armor items available on the market. You can be guaranteed regulated, independent testing when looking for these EN standards.

WHAT DOES AAA-A CLASSIFICATION MEAN?

The AAA-A garment classification is important to check and understand so you make sure you're getting the correct level of protection.

AAA-A classes are certified in accordance with EN 17092:2020. The materials are tested under lab conditions to assess how much speed and force they can withstand before tearing — this is the measure of abrasion resistance. This then allows the AAA-A classification to be assigned.

  • AAA — the highest class possible, AAA is suitable for track racing. Limb protection is mandatory in AAA garments, and back and chest protection are optional. D3O® LP2 limb protectors, the Viper Pro back protector and Racing Chest are great examples of the best armor setup to hit AAA. CE EN 1621-1:2012 limb protection and CE EN 1621-2:2014 back and chest protection are the marks to look out for.
  • AA — best for touring and long-distance riding. This still requires CE EN 1621-1:2012 Level 1 impact protection at the shoulders, elbows, hips and knees. Back and chest protectors are optional but worth the investment. D3O® LP1 limb and Viper Stealth back protectors are great options to consider.
  • A — suitable for urban riding, commuting, and weekend cruising. Bike jeans and other textile-type pants are most likely to be Class A. This requires CE EN 1621-1:2012 Level 1 impact protection at the shoulders, elbows and knees, with hips becoming optional. D3O® Ghost™ is the perfect fit-and-forget armor for more casual riding.

The main difference between the classes is the abrasion, seam strength and cut resistance of the garment. The more you go towards AAA, the better the materials and construction.

D3O works with many partner brands to provide market-leading impact protection armor in motorcycle clothing.

WHAT IS THE DIFFERENCE BETWEEN LEVEL 1 AND LEVEL 2 MOTORCYCLE ARMOR?

D3O® motorcycle impact protection is offered in two levels, Level 1 and Level 2. Choose the right level of protection depending on the type of riding you're doing, as well as taking into consideration the technical features you prefer to have while riding.

  • Level 1 — suitable for most types of riding, Level 1 can be used by urban, commuter, and touring motorcyclists offering them a great level of all-around protection.
  • Level 2 — best suited to bikers racing on tracks, riding more extreme off-road, or stunt riding. Level 2 can provide up to 50% more impact protection than level 1.

D3O offers a range of CE/UKCA armor to protect your chest, back and limbs whilst riding to minimize the likelihood of injury from riding accidents.

Created by Stephanie Kwolek, DuPont™ Kevlar® is a heat-resistant para-aramid synthetic fiber with a molecular structure of numerous inter-chain bonds that make Kevlar® incredibly strong. Best known for its use in ballistic body armor, Kevlar® also has many other uses thanks to its high strength-to-weight ratio.

Stephanie Kwolek, a pioneer in polymer research, earned several patents and awards over her career. She became especially famous for her groundbreaking work that led to the creation of Kevlar® — an incredibly strong material that continues to push the boundaries of what is possible.

Tensile strength

The chemical structure of Kevlar® consists of several repeating inter-chain bonds. These chains are cross-linked by hydrogen bonds, providing tensile strength 10 times greater than steel at equal weight.

Ballistic impact resistance

Kevlar® fibers are so tightly woven that they are almost impossible to separate. When a bullet or other high-speed projectile hits Kevlar®, the fibers catch the projectile, absorbing and dissipating its energy.

Cut and puncture resistance

Thanks to the fully extended and perfectly aligned molecular chains in Kevlar® fibers, Kevlar® provides a reliable protective barrier against cuts, slashes and punctures.

Heat resistance

Kevlar® is an inherently flame-resistant fiber that protects against thermal exposure up to 800 °F (about 427 °C). In addition, Kevlar® fibers do not melt, drip or support combustion.

Riding gear

The American riding gear manufacturer Icon Motosports uses Kevlar in its compression body protection range, motorcycle jeans and motorcycle jackets. Because this material does not melt from friction, it can be used close to the skin. Adding Kevlar fibers to any material makes it an excellent protective layer in sliding crashes on a motorcycle. Its heat resistance also allows Kevlar to be used in motorcycle pants as a protective shield against hot exhaust pipes.

CHEST MEASUREMENT INSTRUCTIONS

Standing with your arms relaxed at your sides, wrap a flexible measuring tape around your chest at its widest point. The tape should pass under your armpits and stay parallel to the floor while measuring.

SLEEVE LENGTH MEASUREMENT INSTRUCTIONS

Standing with your arms relaxed at your sides, place one end of a flexible measuring tape at the base of your neck (right against the neck). Run the tape along your shoulder and arm and stop at the wrist, where the jacket sleeve should end.

Compression Shirt size:

Size S M L XL 2XL 3XL
Chest cm 88,9–94 94–104 104–111,8 111,8–121,9 121,9–134,6 134,6–147,3
Sleeve cm 81,3 83,8 86,4 88,9 91,4 94

Compression Pants size:

Size S M L XL 2XL
Waist circumference in 30–32 32–34 34–36 36–38 38–40
Waist circumference cm 76,2–81,3 81,3–86,4 86,4–91,4 91,4–96,5 96,5–101,6

Compression Knee size:

Size S M L XL
Top circumference cm 35,5 40,6 45,7 50,8
Bottom circumference cm 20,3 25,4 33 40,6

Compression Elbow size:

Size S/M L/XL 2XL/3XL
Biceps circumference cm 25,4–33 27,9–35,5 35,5–40,6
Wrist circumference cm 10,2–12,7 15,2–17,8 20,3–22,9
Length cm 35,5 40,6 43,2

Field Armor Compression protection is designed for a snug fit and comfort, providing extra impact protection under your riding gear or clothing.

1/2

Компрессионная защита локтя Icon FIELD ARMOR

2 127
2/2

ICON Field Armor - Compression Gear

19 279
Recommend
Magazine Wheelie: Trick Theory Magazine ZX636 03-04 Stunt Bike Build Stunt Show with Girls Baldini Stunt Show