Podolsk,
14 Lobacheva st.
To contact page
RU EN
Tue-Fri 11:00-20:00
Sat-Sun 11:00-17:00
Mon - Closed
ULTRAFLITE MISANTHROPE
MIPS GITD motorcycle helmet
ULTRAFLITE MISANTHROPE
ULTRAFLITE MISANTHROPE
ULTRAFLITE MISANTHROPE
ULTRAFLITE MISANTHROPE
ULTRAFLITE MISANTHROPE
ULTRAFLITE MISANTHROPE

See how to choose the right helmet size in the “Size” tab below.

RUB 49,800

If any helmet could be a prop for a metal band, it would be this one. The Ultraflite MIPS Misanthrope helmet could have been released as a collector’s vinyl. The handmade fiberglass shell is light yet strong. The anti-fog Dark Smoke Fog-Free Ultrashield™ visor pairs with enlarged internal DropShield™ goggles for sun protection. The MIPS Brain Protection System is the newest and best head protection technology.

SHELL

  • The handmade fiberglass composite shell provides high strength at minimal weight.
  • LeMans Corporation’s precision engineering and tight assembly technologies make it possible to create a very compact, lightweight helmet that meets all international safety standards at the same time.

FIT

  • Intermediate Oval fit — the most common head shape: the head is slightly longer than it is wide.

OPTICS

  • Comes with two Ultrashield™ visors without optical distortion, with FogFree anti-fog coating: tinted (ECE) and clear with Pinlock mounts.
  • Enlarged DropshieldUltra™ internal tinted visor/goggles.

VENTILATION

  • 4 adjustable intake vents: two at the front and two on top.
  • Adjustable large MX-inspired chin vent.
  • 2 exhaust vents, complemented by deep channels in the inner EPS impact-absorbing liner.
  • Adjustable SpeedWing ejector system in the rear spoiler for effective airflow at speed.

COMFORT

  • Removable moisture-wicking antibacterial Hydradry™ liner with adaptive padding for a personalized fit.
  • Durable, soft-to-the-touch AX Suede™ in high-friction areas.

NOISE

  • Removable chin curtain to reduce wind noise at speed.
  • Aerodynamic visor shape, with the option to close the front vents to reduce noise.

HEADSET

  • Ready for the integrated Icon HelmLink™ Bluetooth® headset (sold separately).

PERSONALIZATION

  • Visors, rear spoilers and internal goggles are sold separately in different colors for custom styling.

SAFETY

  • Meets the international DOT FMVSS 218 (USA), ECE 22-06 (Europe) and PSC (Japan) motorcycle helmet safety standards.
  • Equipped with the best MIPS™ brain protection system. It is a low-friction layer inside the helmet that allows multi-directional movement of 10–15 mm, reducing rotational motion of the head and damping impact energy.
  • The cheek pads have an EQRS system for quick and safe helmet removal after an accident.

Let’s be honest — motorcycle helmets look great, and you’d like to keep yours looking like new for as long as possible. Over many years of practice we have worked out several effective ways to do this, and we are happy to share them.

CLEANING THE HELMET

We strongly do not recommend using solvents, carburetor cleaner, brake fluid or any other substances in the cans, tins and bottles lying around your garage, including unlabeled ones, to clean your helmet. Chemicals and strong solvents can seriously damage the materials the helmet is made of — please don’t do that to your helmet!

WASHING THE LINER

  • Remove the inner comfort liner as described in the “Removing the comfort liner” section of the ICON helmet manuals.
  • Soak the liner in a mild solution of baby shampoo and wash it gently.
  • Rinse several times in clean water until all traces of soap are gone.
  • Let the water drain and air-dry the liner, then reinstall it in the helmet.

* Never wash or dry the liner in a washing machine or dryer.

CLEANING THE OUTER SURFACE (GLOSS HELMETS)

  • Cover the helmet with a towel soaked in hot water and leave it for at least 5 minutes to soften dried-on bugs (don’t skip this step!).
  • Take a fresh towel soaked in a dishwashing liquid solution and remove dirt from the helmet surface.
  • Use a third, dry towel to wipe the helmet and remove water marks.

CLEANING THE OUTER SURFACE (RUBATONE MATTE HELMETS)

  • Cover the helmet with a towel soaked in hot water and leave it for at least 5 minutes to soften dried-on bugs (don’t skip this step!).
  • Remove bugs and dirt with light blotting motions. Use the soft inner side of the included helmet bag or a clean microfiber cloth.

POLISHING THE OUTER SURFACE

  • For helmets with a gloss finish, use an aerosol car wax (sold in any auto store).
  • As for matte parts, we sincerely hope you are not planning to polish a matte surface.

STORING THE HELMET

Protecting your helmet during long-term storage is definitely a good idea. Keep the helmet in the special bag included. Store it in a safe, dry place out of direct sunlight.

CLEANING THE VISOR

The visor surface must be cleaned very carefully to avoid scratches. Place a clean, warm, damp, soft cloth over the outside of the visor for at least 5 minutes to soften dried bugs and dirt (don’t skip this step!). Then gently clean the visor with a clean soft cloth, warm water and mild soap. After that, wipe the visor with a clean soft cloth dampened with clean water to remove soap residue. Dry the visor by gently wiping it with a clean soft cloth.

Never use solvents, window or glass cleaners, or any other chemical cleaners to clean the visor.
Do not apply decals, tape or stickers to the visor.

If your visor has an anti-scratch or anti-fog coating, keep in mind that household cleaners (such as glass cleaners, all-purpose sprays, furniture polish) can leave unwanted marks and in some cases damage the visor itself.

Do not use any cleaners or detergents on the inside of the visor. Using anything other than a clean soft or microfiber cloth and water to gently wipe the inside of the visor can damage or reduce the effectiveness of the anti-fog coating.

Protect the visor when it is not fitted to the helmet. Store the visor in a dry, safe place, away from direct sunlight and extremely high or low temperatures. Make sure the visor cannot be scratched, damaged by impact or otherwise deformed, is not under heavy objects and is not stored near fuel or solvents. We recommend storing the visor in a soft microfiber bag or pouch.

If your helmet has an internal drop-down visor, be sure to follow the same instructions, as they also apply to the internal drop-down visor.

GOOD ADVICE

Although a helmet is hard and has a very strong and reliable construction, it requires careful handling. Dropping a helmet on asphalt or another hard surface can significantly impair its functionality. The user should be aware that an impact may cause damage that is invisible to the eye.

GOOD ADVICE FROM ICON

The riding gear manufacturer ICON Motosports warns: when taking part in activities that require a helmet on your head, it is strongly recommended to avoid hitting your head on anything whatsoever. If you suspect reduced helmet functionality, or after ANY impact during use, replace the helmet. We guarantee it will cost less.

  • DO NOT PULL THE HELMET OFF BY GRABBING THE VISOR OR SPOILER LIKE A HANDLE. THESE PARTS ARE DESIGNED TO BREAK AWAY IN A CRASH.
  • BEFORE REMOVING THE VISOR SIDE PLATE, REFRESH YOUR KNOWLEDGE BY REREADING THE “VISOR REMOVAL/INSTALLATION” SECTION OF THE HELMET MANUALS.
  • DO NOT LEAVE THE HELMET ON THE FUEL TANK. GASOLINE FUMES CAN DAMAGE THE HELMET LINER THAT DISSIPATES IMPACT ENERGY IN A CRASH.

No motorcycle helmet in the world can protect against ALL possible impacts. For your safety, you need to choose a helmet that fits correctly. For maximum head protection, the helmet must fit snugly and follow the shape of your skull as closely as possible. To work properly, the helmet must be securely fastened under the chin.

MEASURING YOUR HEAD

Wrap a flexible measuring tape around your head at its widest point above the eyebrows and ears.

Using this measurement, find your size in the size charts below according to the helmet brand and model:

ICON AIRFLITE / DOMAIN / THRESHOLD

BILTWELL LANE SPLITTER / GRINGO S SV

THOR FLEET / SECTOR 2

Shell 2XS XS S M L XL 2XL 3XL
Circumference cm 51–52 53–54 55–56 57–58 59–60 61–62 63–64 65–66

 

ICON ULTRAFLITE / AIRFRAME PRO

THOR REFLEX

Shell XS S M L XL 2XL 3XL
Circumference cm 54–55 55–56 57–58 58–59 60–61 62–63 64–65

 

ICON AIRFORM

Shell XS S M L XL 2XL 3XL
Circumference cm 53–54 55–56 57–58 58–59 60–61 62–63 64–65

 

HEAD SHAPE

Skull shape in the horizontal plane is just as important as circumference. To determine your head shape, put on a balaclava (it will flatten your hair) and take a photo of your head from above, or ask someone to assess it. Round head — width and length are almost the same, it fits into a circle. Intermediate oval head — slightly longer than it is wide, the most common skull shape, it fits into a regular oval. Long oval — noticeably longer than it is wide, it fits into a narrow oval.

Different helmet models are made for different skull shapes — keep this in mind when choosing a helmet:

  • ICON helmets: Airflite, Airform are made for an intermediate oval head. The Airform feels slightly wider than the Airflite. The Airflite also fits a long oval head well.
  • ICON helmets: Ultraflite are made for an intermediate oval head, but they also fit a long oval head well, as well as a head shaped between round and oval, but not a round one. The Ultraflite feels slightly wider than the Airflite. Overall, the Ultraflite is a more adaptable helmet and fits a wider variety of intermediate oval and long oval heads than the Airflite.
  • ICON helmets: Threshold are made for an intermediate oval head. They fit similarly to the Ultraflite, meaning they are more adaptable and suit a wider variety of heads that deviate from the intermediate oval toward both round and long oval.
  • ICON helmets: Domain — for a round head (Round Oval), but it also fits an intermediate oval head well.
  • ICON helmets: Airframe Pro — for intermediate oval and long oval heads.
  • BILTWELL helmets: Gringo SV, Gringo S and Gringo — for round (Round Oval) and intermediate oval heads.
  • BILTWELL helmets: Lane Splitter — for round (Round Oval) and intermediate oval heads.
  • THOR helmets: FLEET fit round (Round Oval) and intermediate oval heads very well.
  • THOR helmets: REFLEX are made for an intermediate oval head, but they also fit a long oval head well.
Head shapes: round oval, intermediate oval, long oval

If you can’t determine your head shape (this sometimes happens), it is most likely an intermediate oval, because a round head shape (equal length and width) is the most obvious.

If your head shape doesn’t match the helmet shape, you need to go one or two sizes up, depending on how big the difference in skull oval is. In that case the liner will fit your skull unevenly and not over its whole area, which has a negative effect on impact energy absorption as well as on the helmet’s noise insulation.

NOTE: The helmet’s inner pads compress with use — keep this in mind when trying it on. The helmet should fit snugly and should not press painfully on your skull. The pressure on your cheeks can be quite strong, and they may be squeezed. The cheek pads are the thickest and compress the most.

We don’t believe you need to wear a helmet for a while to get used to it. A helmet chosen correctly by size and shape fits comfortably and snugly right away — proven by hundreds of customers! The only thing that may be uncomfortable is a tight entry when taking the helmet off and putting it on. Over time the pads at the entry will soften, and the helmet will be much easier to put on and take off. Focus on how your head feels inside the helmet!

The Mips® safety system

A technology, built into helmets and designed to help reduce rotational motion to the head that could occur in so-called oblique impacts.

We have over 25 years of research into rotational motion and helmet safety, and an abundance of studies and data that say the same thing: in the vast majority of accidents in which someone hits their head, the impact is oblique, and an oblique impact entails an increased risk of brain damage. The same thing goes for objects falling from above at, for instance, a building site: they cause an oblique impact — even if you are standing still.

Mips means addressing the rotational motion

The moment your head hits the ground at an angle, rotational motion can make the head rotate more or less, depending on the impacting object or surface. The energy from the impact can be directed further into the head, which can cause brain injury. Rotational motion is thus the result of oblique impacts to the head.

The brain is more sensitive to oblique impacts versus straight impacts. Oblique impacts are also much more common. But most helmets on the market today are only tested and approved for straight impacts, even though these kinds of accidents are far less common.

Designed to help reduce rotational motion to the head in oblique impacts

Everything revolves around the Mips low-friction layer. It mimics the brain’s own protective system, which allows the brain to move slightly inside the head. The Mips system is designed to work on the same principle. The low-friction layer is built into the helmet and makes the energy-absorbing layers (the “padding”) mobile so that the head can move 10–15 mm inside the helmet on impact.

The Mips® safety system is available in different designs for different areas of use, but the principle is the same for all options. The system is attached to the helmet with elastic material, ensuring that the low-friction bearing is always in the proper position. The low-friction bearing has also been specially engineered to fit each helmet model and size and is injection-molded to fit perfectly inside each individual helmet. It provides a minimalist, fully integrated design that neither interferes with the helmet’s fit nor affects the weight more than marginally. A Mips system weighs between 20 and 45 grams.

Mips® safety system — a bright idea based in science

Mips is a technology that is based on many years of research into the brain and brain damage, and we are firmly rooted in science. Our story begins in 1995, when brain surgeon Hans von Holst from Karolinska Institutet in Stockholm, Sweden, began researching helmet construction. He based his research on the realization that the helmets available at the time did not offer sufficient protection against brain damage. He contacted the KTH Royal Institute of Technology in Stockholm to initiate biomechanical research on the prevention of head and neck injuries.

The initiative led to what is now recognized as one of the most important Finite Element (FE) models of the human brain in the world. The model is an important research tool for Mips when it comes to visualizing and measuring the effects of the Mips system. Our first product was a proprietary riding helmet launched in 2007. Since then, Mips has become an “ingredient brand,” which means we sell our technology to other manufacturers, who in turn incorporate it into their products. Today, our safety systems are found in helmets for everything from skiing and cycling to construction and industry.

AX® Materials became known for developing a synthetic leather specifically for gloves that outperformed natural leather in every respect.

The first product was AX® Suede Original, which set the industry standard for comfort, flexibility, high abrasion resistance and tear strength. Since then the range of materials has grown and now includes various types of synthetic leather and mesh textiles, including touchscreen-compatible ones.

Gloves made of AX leather with no damage or significant wear after 122 hours of testing in construction work.

Today AX® materials are used in many products beyond gloves: clothing, workwear, bags, sports equipment of all kinds and riding gear. AX® materials are used by more than 150 brands worldwide (Dakina, Watson, Akta, Mog, Viktos, Loffi, Chromag, Bike Radar and others) to take their gear to a new level of performance.

Fiber

AX® Materials uses specially structured synthetic polyester fibers to create thin, strong and flexible materials.

These polyester fibers last longer and keep their integrity better than natural suede and leather, while being more breathable and flexible.

Breathability

AX Laredo leather: breathability and moisture release

AX® materials are made with knitted polyester with minimal polyurethane content, which provides greater breathability than leather and other glove materials, both synthetic and natural.

This lets heat and sweat escape easily from the glove palm and ensures a secure, grippy, dry hold.

Durability

The chart shows a comparison of 0.75 mm Ax Grane Laredo synthetic leather and 1.1 mm cowhide in abrasion resistance and breathability.

AX® products are designed to outperform all other materials and improve performance in use. AX® Materials have proven their effectiveness in various jobs and industries, regardless of conditions. Special high-density yarn combined with other “working fibers” in a complex knitting process creates an optimal balance of strength, softness and flexibility.

The photo shows the wear of 0.8 mm AX synthetic suede after 4,000 cycles of disc abrasion under a 1 kg load. Standard cowhide suede does not last even 1,000 cycles.

Grip and flexibility

Your hands work hard, and a good grip helps reduce the strain. AX® materials have polyurethane and silicone coatings with various textures and embossing, providing superb grip and protection.

AX® materials give your gloved palm a second-skin feel: they don’t slip, they keep sensitivity and they are unnoticeable when bending.

Riding gear

Icon Motosports is among the first to get access to advanced technologies, including AX materials, which are most widely used in motorcycle gloves. Ax Laredo leather glove palms easily pass all certification tests for the USA, Europe and Japan. Almost all the gloves can be used with touchscreens. Some models are made entirely of AX leather or suede.

Icon collections also include motorcycle jackets and vests made partly or entirely of Ax Laredo. As a rule, such models cost not much more but outperform the others in use.

SAFETY STANDARDS

The motorcycle helmet meets the following safety standards:

  • UNECE — UN Regulation No. 22.06 (Europe)
  • DOT — US Federal Motor Vehicle Safety Standard No. 218 (FMVSS No. 218)
  • PSC / JIS / SG — Japan

SHELL AND EPS

The fiberglass or carbon (depending on the model) composite shell of the ICON® ULTRAFLITE™ helmet is made to strict quality control standards.

The dual-layer expanded polystyrene (EPS) liners in the ICON® ULTRAFLITE helmet are designed for maximum impact absorption and energy dissipation. In addition, both liners have an extensive system of directed ventilation channels that distribute airflow from the external ventilation system.

  1. Shell
  2. EPS density 2
  3. EPS density 1

HELMET COMPONENTS

  1. Upper front adjustable vent
  2. Visor mechanism/mount
  3. Visor gasket
  4. ULTRASHIELD visor
  5. Visor side plates
  6. DROPSHIELD ULTRA internal sun visor
  7. Breath deflector
  8. Lower front adjustable vent
  9. Internal visor up/down slider
  10. Visor lock
  11. SPEEDWING vented rear spoiler
  12. Rear exhaust ports
  13. MIPS brain protection system
  14. Dual-density EPS
  15. Top comfort liner
  16. EMERGENCY RELEASE cheek pads
  17. Base gasket
  18. HELMLINK headset side panels
  19. EMERGENCY RELEASE tabs
  20. Earplug storage pockets

SAFETY WARNINGS

Riding a motorcycle is a dangerous activity. No helmet can fully protect the user from all possible impacts. Always wear a helmet, eye protection, protective clothing, gloves and footwear when riding. Even if you use the helmet described in this manual, there is no guarantee that serious injury or death can be prevented.

When riding a motorcycle, take all precautions to minimize risk. This helmet is not designed to protect against fire and does not contain fire-resistant materials. Make sure your ICON® helmet fits you correctly. Incorrectly sized or misused products can lead to serious injury or death.

Instructions on how to choose the right helmet size are in every helmet product page on our website, in the “SIZE” tab.

ONE-IMPACT RULE

Any helmet that has been subjected to an impact must be replaced. A helmet is designed to absorb only one impact. It absorbs part of the energy through partial destruction of the shell and inner layer. After an impact, the inner shock-absorbing layer (liner) dissipates the energy, which compresses the material and makes it lose its protective properties. This damage may be invisible. Even if no external damage is visible, the helmet loses its effectiveness after one impact. Such a helmet must be destroyed and replaced, even if it looks undamaged.

CORRECT SIZE

To provide proper protection, the helmet must fit snugly on the head and be securely fastened. Although no helmet can fully protect the user from all possible impacts and crashes, proper use of this helmet will provide a much higher level of protection than riding without one.

For the helmet to do its job, reduce the risk of injury or death and provide maximum protection, it must fit snugly on the head and have a securely fastened retention system (chin strap). With the strap adjusted comfortably but snugly, the helmet must not come off the head when pulled up and forward from the back.

Helmet fit is crucial to its protective properties. Different helmet models may fit differently due to differences in construction and shape. The right helmet size can only be determined by trying it on. Always try on a helmet in a store before buying to make sure it fits you. If you cannot find a suitable size in this model, try another certified motorcycle helmet model.

CHECKING HELMET FIT

  • Unfasten the chin strap as described in the “Using and adjusting the chin strap” section.
  • Hold the straps as shown in [DIAGRAM 4] and gently spread the edges of the helmet to widen the opening.
  • Put the helmet on your head.
  • If the helmet does not fit snugly or feels loose, try a smaller size.
  • It is very important that the helmet fits snugly — only then can it perform its protective function.

HOW TO CHECK IF THE HELMET FITS

  • Put the helmet on and make sure the inner liner fits snugly against your head and the cheek pads press firmly against your cheeks. There should be no gap between your forehead and the liner.
  • Hold the sides of the helmet with your hands and try to move it up and down and from side to side [DIAGRAM 5A]. With a correct fit, you should feel the skin on your face and head move slightly with the liner. If the helmet moves freely without touching the skin, it is too big and you need a smaller size.
  • Repeat the check holding the helmet at the front and back, and try to rock it forward and backward [DIAGRAM 5B].

CHECKING THE CHIN STRAP RETENTION SYSTEM

  • Securely fasten the chin strap following the instructions in the “Using and adjusting the chin strap” section. The strap should be as tight as possible without choking. It should fit snugly under the chin with no slack.
  • Check the helmet retention: place one hand on top of the helmet and the other on the chin bar [DIAGRAM 5B] and try to push the helmet forward as if trying to take it off your head.
  • Then, keeping your hand on the chin bar, try to rotate the helmet backward.
  • If the helmet comes off your head in either case, do not use it. You need to choose another size that fits correctly.

CHECKING HELMET POSITION

  • After fastening the retention system, check how the helmet sits on your head. It should not sit too low or too high so as not to restrict your view [DIAGRAM 6]. Your eyes should be in the center of the eyeport (visor area).
  • Make sure the helmet is comfortable and the visor does not obstruct your view in either the open or closed position.
  • Repeat these steps until you find the ideal helmet size that provides a snug but comfortable fit.

USING THE HELMET

USING AND ADJUSTING THE CHIN STRAP

Correct fastening and tension of the chin strap are crucial to the helmet’s effectiveness. If the strap is not fastened or is tightened incorrectly, the helmet may not work properly or may come off in a crash, which can result in serious injury or death.

D-RING CHIN STRAP RETENTION SYSTEM

If you cannot correctly fasten or adjust the strap retention system on this helmet, do not use it for riding — choose another certified helmet that fits you.

NEVER ride with the strap unfastened! This can result in injury or death. For the helmet to work properly, the strap must always be securely fastened during use. Periodically check that the strap remains firmly secured. If you feel the strap has loosened while riding, stop immediately in a safe place and adjust the tension to the correct level.

OPERATING THE D-RING CHIN STRAP

To unfasten the D-ring strap:

  • Release the snap on the loose end of the strap from its attachment point.
  • Loosen the strap by pulling it back through the rings, and pull the strap completely out of the rings.

To securely fasten the strap with the D-ring system:

  • Make sure the strap retention system is undone.
  • Spread both ends of the strap apart and put on the helmet, positioning it correctly on your head.
  • Bring the ends of the strap together under your chin, making sure the straps are not twisted.
  • Thread the loose end of the strap through both rings (see DIAGRAM 7).
  • Then bring it back — thread it in the opposite direction through one ring (see DIAGRAM 7).
  • Pull the loose end of the strap to tighten.
  • The strap should fit snugly against the jaw (see DIAGRAM 8).
  • If you can loosen the strap by pulling down, it is fastened or tightened incorrectly — repeat steps 2, 3 and 4 until the strap is secured correctly.
  • When the strap is securely fastened and fits snugly, secure the snap on the loose end of the strap at its attachment point.

IMPORTANT: The snap only serves to secure the loose end of the strap so that it does not flap in the wind while riding. It is not part of the helmet retention system and must not be used on its own without correctly fastening the strap through the D-rings as shown in the illustration.

BEFORE EACH USE

Make sure your helmet is in good condition before each use. Always check the helmet for loose parts, screws and rivets, a worn chin strap, cracks and other signs of wear or damage that could prevent you from fastening and wearing the helmet correctly. Before each use, make sure the inner liner and cheek pads are correctly installed and the chin strap system is securely fastened.

EYE PROTECTION

The visors (face shields) supplied with this helmet meet the requirements of VESC-8 Regulation.

SAFETY WARNING: DO NOT RIDE WITHOUT CERTIFIED EYE PROTECTION THAT MATCHES THIS HELMET AND IS DESIGNED FOR MOTORCYCLE USE. FAILURE TO USE APPROVED EYE PROTECTION MAY RESULT IN SERIOUS INJURY OR DEATH.

SAFETY WARNING: DO NOT RIDE WITHOUT THE VISOR FULLY CLOSED. IF THE VISOR IS OPEN WHILE RIDING, THE AIRFLOW MAY TEAR IT OFF THE HELMET. IMPROPER USE OF THE VISOR MAY RESULT IN SERIOUS INJURY OR DEATH.

SAFETY WARNING: DO NOT RIDE USING ONLY THE INTERNAL DROP-DOWN VISOR WITH THE MAIN VISOR OPEN. THIS MAY RESULT IN SERIOUS INJURY OR DEATH.

WARNING: VISORS

  • Tinted visors marked “IF TINTED. FOR DAYTIME USE ONLY” or with the EU sun pictogram are not suitable for use at dusk, at night, in poor visibility or in adverse weather.
  • Colored visors that interfere with recognizing road signs are not intended for use on public roads.
  • Choose a visor suitable for the conditions in which it will be used.
  • Make sure the visor is always in perfect condition and that wear or damage does not impair visibility.

WARNING: INTERNAL DROP-DOWN SUN VISOR (if fitted)

  • Not suitable for use at dusk, at night, in poor visibility or in adverse weather.
  • Colored visors that interfere with recognizing road signs are not suitable for use on public roads.
  • Choose a visor suitable for the operating conditions.
  • Make sure the visor is always clean and free of damage that impairs visibility.

WARNING: PINLOCK® INSERT (if fitted)

  • Tinted Pinlock® inserts are not suitable for use at dusk, at night or in poor visibility.
  • Colored Pinlock® inserts that interfere with recognizing traffic signals are not intended for use on public roads.
  • Choose a Pinlock® insert suitable for the conditions of use.
  • Make sure the Pinlock® is always in perfect condition and does not obstruct your view.

WARNING: TEAR-OFF FILMS (if used)

  • Tinted Tear-Off films are not suitable for use at dusk, at night or in poor visibility.
  • Colored Tear-Off films that interfere with recognizing traffic signals are not intended for use on public roads.
  • Choose a Tear-Off film suitable for the operating conditions.
  • Make sure the film used is always in perfect condition and does not impair visibility.

VISOR INSTRUCTIONS

VISOR INSTALLATION

  • To install the visor, line up the mount posts with the corresponding cutouts on the visor [1] while holding the visor in the fully open position.
  • Press the visor at the mounting points so that each hole seats on its pivot with a click.
  • Then rotate the visor forward to the fully closed position.
  • Reinstall the side panels [2] by lining up the side panel locating pins with the holes in the helmet shell, then press to insert them into the shell.

VISOR REMOVAL

  • To remove the visor (face shield), first remove the side panels [1]. Holding them firmly at the front and top, pull outward. The two shaped pins on each side panel will “pop” out of the holes in the helmet shell with a distinct click.
  • After removing the side panels, fully open the visor [2] and keep rotating it until it stops in the fully raised position. When the visor is fully raised, it will come off the mounts.

INTERNAL DROP-DOWN VISOR INSTALLATION

  1. Open the main outer visor and move the internal drop-down sun visor switch to the DOWN position to lower the mounting clips.
  2. Start on the side where the visor control slider is. Line up the tabs on the visor with the clips of the internal mechanism and press the lens firmly until you hear a click (“CLICK”).
  3. Repeat the same process on the opposite side of the internal drop-down visor.
  4. After installation, move the internal visor slider to its end positions to make sure it is installed correctly. Clean the internal drop-down visor with an ICON lens cloth or soft microfiber.

INTERNAL DROP-DOWN VISOR REMOVAL

  1. Open the main outer visor and lower the internal drop-down visor.
  2. Holding the helmet firmly, pull the internal drop-down visor forward and down until you hear two clicks — the internal visor will then be released from the mounting clips on both sides.

VISOR CHECK BEFORE EACH USE

Inspect the visor. Make sure the visor mechanisms work properly and provide sufficient transparency and clear visibility. Remove dirt, insects, marks or any other contamination that could impair your view. A dirty visor greatly reduces visibility, so for your safety clean it immediately.

Check the visor for physical damage, cracks and scratches. A scratched, cracked or otherwise damaged visor significantly impairs visibility and must be replaced.

HEARING

Wearing any helmet reduces your ability to hear surrounding sounds. The user should be aware of this reduced hearing and keep a close eye on their surroundings. Ignoring this fact may lead to an accident that can cause serious injury or death.

Before using any communication system built into the helmet, make sure you know and understand the local, regional, national and international rules on using communication devices while operating a vehicle — in all regions where you plan to travel.

VENTILATION SYSTEM

The ICON® Ultraflite™ helmet has an enlarged adjustable front chin vent, two adjustable upper forehead vents and two upper adjustable Supervent air intakes.

Large switches that are easy to operate with gloves give easy access to ventilation adjustment on the move, and a large adjustable rear exhaust channel effectively draws hot air out.

HELMET VENTILATION OPERATION

To open the front chin vent (1a), push down on the vent switch inside the chin bar. To close it, simply push the same switch up (1b).

The two main forehead vents (2a) open when you push the vent covers up. To close them, push the covers down (2b).

The two upper Supervent vents (3a) open when you slide the aerodynamic spoiler back. To close them, slide the spoiler forward (3b).

COMFORT LINER AND CHEEK PADS

SAFETY WARNING: The comfort liner and cheek pads are integral parts that ensure the helmet works correctly and protects properly. They must be correctly installed every time the helmet is used. Incorrect installation of the liner or cheek pads may result in serious injury or death.

The ICON® Ultraflite™ helmet has an interior lining made of the exclusive moisture-wicking HydraDry™ material for comfort and dryness.

Helmet size is determined by a combination of three factors: the size of the outer shell, the thickness of the inner EPS layer, and the thickness of the interior components (liner and cheek pads).

The helmet fit can be customized by replacing the cheek pads with thinner ones for a looser fit or thicker ones for a snugger fit. To order replacement interior components, contact our shop manager.

LINER REMOVAL AND INSTALLATION

[1] Turn the helmet upside down with the chin bar facing away from you. Release each cheek pad by pulling it inward to unsnap the snaps and hook-and-loop fasteners. Note how the chin straps pass through the pads and how the cheek pad mounting plate fits between the helmet shell and the EPS layer — this is important for reassembly.

[2] Remove the comfort liner by unsnapping it from the two snaps at the back of the helmet. Then release the two snaps in the forehead area. After that, remove the central (crown) liner, noting how its mounting plate fits between the shell and the EPS layer.

To reinstall the comfort liner and cheek pads, follow these steps in reverse order.

EMERGENCY RELEASE SYSTEM

This helmet is equipped with an emergency cheek pad release system. This feature is designed to make it easier for rescue personnel to remove the cheek pads in an emergency.

Removing the cheek pads and helmet in an emergency involves increased risk that may result in injury or death.

Cheek pad removal should only be performed by qualified rescue personnel.

The injured person’s head must not move during this process. The head in the helmet must be stabilized and held to prevent any movement.

EMERGENCY CHEEK PAD REMOVAL:

  • With the injured person’s head held and stabilized, remove the chin curtain if fitted (see illustration 1).
  • Cut or unfasten the chin strap (see illustration 2).
  • Insert a finger into the red emergency release loop on one of the cheek pads (see illustration 3).
  • Pull the loop to pull the cheek pad out through the bottom of the helmet (see illustration 4).
  • Repeat the procedure for the second cheek pad.

CHIN CURTAIN

The chin curtain must be correctly installed when used with the helmet. Incorrect installation of the chin curtain may result in serious injury or death.

INSTALLATION

Find the locking tabs on the inside of the chin curtain. Line up the center of the curtain with the chin bar of the helmet and firmly insert the tabs into the helmet slots, pressing until they lock.

REMOVAL

Firmly grasp the chin curtain and pull down to remove it.

CHIN CURTAIN CARE

ICON® helmets come with a removable chin curtain, making it easier to clean and care for the inside of the helmet. Remove the curtain following the instructions above and gently hand wash it with baby shampoo in cold water. Air dry naturally. DO NOT MACHINE WASH OR TUMBLE DRY. Hand wash and air dry only.

HELMET WEAR AND DISPOSAL

The service life of a helmet is limited, and it should be replaced when obvious signs of wear appear, such as: a change in fit, cracks, rust, worn or frayed parts, and any other signs of natural aging and wear that could impair the helmet’s protective properties.

Using a helmet that shows signs of wear may result in serious injury or death.

Replace this helmet 5 years after its date of manufacture (the date is shown on the inner liner of the helmet), even if it has not been damaged or subjected to impacts.

If you have bought a new helmet, destroy the old one to prevent it from being reused. Do not sell or give your old helmet to other people, even if it has not been damaged. Over time, the inner protective layer of a helmet takes the shape of the owner’s head, so when used by another person the helmet will not provide the proper level of protection, which may result in serious injury or death.

No personal protective equipment can completely prevent injury in a crash or fall from a motorcycle. No riding gear can provide absolute protection against impacts or abrasion resulting from a crash or fall.

Motorcycling is inherently dangerous, and using this helmet does not guarantee the prevention of injury or death. Even a low-speed crash can result in serious injury or death.

By using this helmet, the user assumes all risks associated with this activity that may result in injury or death.
The user hereby waives any claims against Icon® Motosports (a division of Lemans Corporation) and Lemans Corporation in the event of injury or death, and agrees not to file lawsuits related to injury or death occurring while using Icon® Motosports products.

1/1

ICON ULTRAFLITE™

11 982
Recommend
Magazine Wheelie: Trick Theory Magazine ZX636 03-04 Stunt Bike Build Stunt Show with Girls Baldini Stunt Show