Named after our favorite explorer, the Domain Cornelius has a handmade FRP shell for maximum strength at minimal weight. In addition, a raised rear crest, large intake vents above the brow and multi-channel EPS provide improved ventilation. This ventilation, combined with a removable Hydradry liner and removable chin curtain, significantly increases rider comfort. The Domain Cornelius kit includes a color-matched OTT spoiler, an additional RST Dark Smoke visor and a standard clear visor. The Domain is also compatible with the ICON HelmLink Bluetooth communication system, which integrates easily into the helmet (sold separately).
WORLD STANDARDS COMPLIANCE:
VISORS:
LINER:
VENTILATION:
SHELL:
Let’s be honest — motorcycle helmets look great, and you’d like to keep yours looking like new for as long as possible. Over many years of practice we have worked out several effective ways to do this, and we are happy to share them.
We strongly do not recommend using solvents, carburetor cleaner, brake fluid or any other substances in the cans, tins and bottles lying around your garage, including unlabeled ones, to clean your helmet. Chemicals and strong solvents can seriously damage the materials the helmet is made of — please don’t do that to your helmet!
* Never wash or dry the liner in a washing machine or dryer.
Protecting your helmet during long-term storage is definitely a good idea. Keep the helmet in the special bag included. Store it in a safe, dry place out of direct sunlight.
The visor surface must be cleaned very carefully to avoid scratches. Place a clean, warm, damp, soft cloth over the outside of the visor for at least 5 minutes to soften dried bugs and dirt (don’t skip this step!). Then gently clean the visor with a clean soft cloth, warm water and mild soap. After that, wipe the visor with a clean soft cloth dampened with clean water to remove soap residue. Dry the visor by gently wiping it with a clean soft cloth.
Never use solvents, window or glass cleaners, or any other chemical cleaners to clean the visor.
Do not apply decals, tape or stickers to the visor.
If your visor has an anti-scratch or anti-fog coating, keep in mind that household cleaners (such as glass cleaners, all-purpose sprays, furniture polish) can leave unwanted marks and in some cases damage the visor itself.
Do not use any cleaners or detergents on the inside of the visor. Using anything other than a clean soft or microfiber cloth and water to gently wipe the inside of the visor can damage or reduce the effectiveness of the anti-fog coating.
Protect the visor when it is not fitted to the helmet. Store the visor in a dry, safe place, away from direct sunlight and extremely high or low temperatures. Make sure the visor cannot be scratched, damaged by impact or otherwise deformed, is not under heavy objects and is not stored near fuel or solvents. We recommend storing the visor in a soft microfiber bag or pouch.
If your helmet has an internal drop-down visor, be sure to follow the same instructions, as they also apply to the internal drop-down visor.
Although a helmet is hard and has a very strong and reliable construction, it requires careful handling. Dropping a helmet on asphalt or another hard surface can significantly impair its functionality. The user should be aware that an impact may cause damage that is invisible to the eye.
The riding gear manufacturer ICON Motosports warns: when taking part in activities that require a helmet on your head, it is strongly recommended to avoid hitting your head on anything whatsoever. If you suspect reduced helmet functionality, or after ANY impact during use, replace the helmet. We guarantee it will cost less.
No motorcycle helmet in the world can protect against ALL possible impacts. For your safety, you need to choose a helmet that fits correctly. For maximum head protection, the helmet must fit snugly and follow the shape of your skull as closely as possible. To work properly, the helmet must be securely fastened under the chin.
Wrap a flexible measuring tape around your head at its widest point above the eyebrows and ears.
Using this measurement, find your size in the size charts below according to the helmet brand and model:
ICON AIRFLITE / DOMAIN / THRESHOLD
BILTWELL LANE SPLITTER / GRINGO S SV
THOR FLEET / SECTOR 2
| Shell | 2XS | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|---|
| Circumference cm | 51–52 | 53–54 | 55–56 | 57–58 | 59–60 | 61–62 | 63–64 | 65–66 |
ICON ULTRAFLITE / AIRFRAME PRO
THOR REFLEX
| Shell | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Circumference cm | 54–55 | 55–56 | 57–58 | 58–59 | 60–61 | 62–63 | 64–65 |
ICON AIRFORM
| Shell | XS | S | M | L | XL | 2XL | 3XL |
|---|---|---|---|---|---|---|---|
| Circumference cm | 53–54 | 55–56 | 57–58 | 58–59 | 60–61 | 62–63 | 64–65 |
Skull shape in the horizontal plane is just as important as circumference. To determine your head shape, put on a balaclava (it will flatten your hair) and take a photo of your head from above, or ask someone to assess it. Round head — width and length are almost the same, it fits into a circle. Intermediate oval head — slightly longer than it is wide, the most common skull shape, it fits into a regular oval. Long oval — noticeably longer than it is wide, it fits into a narrow oval.
Different helmet models are made for different skull shapes — keep this in mind when choosing a helmet:
If you can’t determine your head shape (this sometimes happens), it is most likely an intermediate oval, because a round head shape (equal length and width) is the most obvious.
If your head shape doesn’t match the helmet shape, you need to go one or two sizes up, depending on how big the difference in skull oval is. In that case the liner will fit your skull unevenly and not over its whole area, which has a negative effect on impact energy absorption as well as on the helmet’s noise insulation.
NOTE: The helmet’s inner pads compress with use — keep this in mind when trying it on. The helmet should fit snugly and should not press painfully on your skull. The pressure on your cheeks can be quite strong, and they may be squeezed. The cheek pads are the thickest and compress the most.
We don’t believe you need to wear a helmet for a while to get used to it. A helmet chosen correctly by size and shape fits comfortably and snugly right away — proven by hundreds of customers! The only thing that may be uncomfortable is a tight entry when taking the helmet off and putting it on. Over time the pads at the entry will soften, and the helmet will be much easier to put on and take off. Focus on how your head feels inside the helmet!
For two decades, ICON® has created technologically advanced products designed specifically to meet the needs and demands of street riders. Thanks to years of experience in development, testing and use, we understand the core needs of urban riders. Anyone can easily rework an old helmet design; in our developments we prefer to look ahead. The Domain™ motorcycle helmet is designed for a future that has never been, but that will surely come one day.
An enlarged eyeport increases the area available to peripheral vision and complements our advanced developments in anti-fog visor coatings. The tool-free visor change system lets you quickly fit the visor best suited to the conditions, and all of them provide a distortion-free field of view.
The contoured brow line provides optimal airflow and directed ventilation, channeling air through deep channels between the expanded polystyrene liner and the soft inner lining that run throughout the helmet. This ventilation system works at any speed, delivering a refreshing flow of cool air to the inner surface of the helmet, which, combined with the soft lining made of moisture-wicking Hydradry™ material, effectively reduces heat build-up inside the helmet.
The injection-molded expanded polystyrene inner liner has special recesses for Bluetooth® systems, and you can upgrade the helmet to use a Sena device, which integrates fully into the helmet when installed without the slightest compromise to its flawless appearance. The ICON® Motosports Domain™ helmet is designed for the only possible future.
SAFETY WARNING: Riding a motorcycle involves increased risk. No helmet in the world can provide complete protection against all possible impacts. When riding a motorcycle you should always wear: a helmet, eye protection, protective gear, gloves and boots. Nevertheless, we cannot fully guarantee protection from serious injury or death even if you are wearing the helmet described in this manual (the same applies to any other helmet). To avoid the risks associated with motorcycling, take all precautions while riding. This helmet is not intended for use as a fire protection device and does not contain fire-resistant materials. Please make sure the helmet and other ICON® products fit you correctly. Using gear of the wrong size may impair your ability to control the motorcycle. Using products of the wrong size, or using products other than as intended, may lead to serious injury or death.
No motorcycle helmet can protect against all possible injuries. For your safety, choose a helmet that fits you correctly. For maximum head protection, the helmet must fit snugly and be securely fastened under the chin.
To ensure a proper fit, follow the instructions below:
Note that the helmet visor is adjustable. Before buying, try on the helmet with the visor in all possible positions to make sure it meets your requirements exactly and the visor in the open position does not block your view. Repeat these steps until you find a helmet of the right size.
For the helmet to work properly, the chin strap must always be securely fastened when worn. With the chin strap fastened, the helmet must not come off when pulled from the center of the back. Periodically check the chin strap to make sure vibration has not loosened it. To check, simply pull on it a little.
To securely fasten the D-ring retention system, thread the end of the chin strap through the D-rings exactly as shown in the figure below. Fasten the snap on the chin strap to secure the loose end of the strap once it is securely fastened. The only function of the snap at the end of the chin strap is to keep it from flapping in the airflow. It is not part of the retention system. It should be used separately, without threading through the D-rings, as shown below.
To unfasten the D-ring retention system, release the loose end of the chin strap from the snap. Then pull the red tab at the end of the lower D-ring to loosen the chin strap. After that, pull the end of the chin strap back through the D-rings to release it completely.
MAKE SURE THE CHIN STRAP IS FASTENED ACCORDING TO THE INSTRUCTIONS ABOVE. MISHANDLING THE STRAP MAY RESULT IN SERIOUS INJURY OR DEATH.
Safety warning: Do not rely on the chin strap snap alone. It only serves to keep the loose end of the strap out of the way while riding. Fasten the retention system only as shown in the image.
The ICON® DOMAIN™ is designed to the DOT FMVSS 218 (USA) and ECE 22.06 (Europe) helmet safety standards, which we call the ICON WORLD STANDARD. These advanced protection standards are officially recognized at government level in more than 50 countries. Before repairing or replacing components of the DOMAIN™ helmet, carefully review the diagram below and familiarize yourself with the specific names and terms used to describe the various helmet components.
DO NOT MAKE ANY MODIFICATIONS TO THE HELMET. To keep this helmet fully effective, no modifications should be made to its construction as a whole or to individual components. Paints and adhesives can damage the helmet and reduce the protection it provides, and the damage will be invisible to the user.
SHELL AND EXPANDED POLYSTYRENE (EPS) LINER
The ICON® DOMAIN™ outer shell is made using advanced modern technology by compression molding of a pre-impregnated material.
The impact-absorbing material in the ICON® DOMAIN™ helmet is expanded polystyrene. Divided into several parts, it provides complex branched airflow as well as dual density for better impact absorption.
COMFORT LINER
The ICON® DOMAIN™ helmet has an optimized soft inner liner made with ICON’s exclusive moisture-wicking material, HYDRADRY.
HYDRADRY liners can be selected individually for a helmet of any size, allowing a snugger or looser fit for the same helmet size.
To order replacement comfort liner components, contact your local ICON dealer or visit www.rideicon.com.
REMOVING AND INSTALLING THE COMFORT LINER
How to remove the comfort liner components for cleaning or replacement:
SAFETY WARNING: The comfort liner is an integral part of the helmet and must be installed every time the helmet is used. Incorrect installation of the comfort liner may lead to serious injury or death.
VENTILATION SYSTEM
In total, the ICON DOMAIN helmet has eight intake vents and one enlarged exhaust vent. Large switches that are easy to use with gloves give easy access to the cooling system on the move, and a large rear exhaust vent draws hot air backward.
The deep-channeled EPS liner enhances this function, increasing the efficiency of airflow redirection. The 6-port chin vent is designed to remove exhaled air at low speeds and to let in incoming air in any body position.
The DOMAIN™ uses three simple switches to control airflow inside the helmet. The two main forehead vents (1a) are opened by pushing the vent covers upward. To close the forehead vents, push the covers downward (1b).
To open the chin vent (2a), press the vent switch located in the chin area inside the helmet. The vent is closed by simply pushing the vent switch upward (2b).
VISOR REMOVAL
1. Raise the visor to its highest position and press down on each of the stop tabs located behind the visor edge.
2. Holding the stop tabs down, rotate the visor back; the retaining pins will “push” the visor out of the locking guides.
3. To replace the visor, line up the pivot posts with the pivot guides on each side of the helmet.
4. With the sides lined up, press the visor into the pivot guides on each side of the helmet while pressing down on the stop tabs.
5. Once the visor is aligned with the pivot guides, rotate the visor forward; the stop tabs will rise and the visor will be locked in the pivot guides.
UPGRADE: HELMLINK COMMUNICATOR
Together with SENA Communications, ICON has developed the HelmLink Bluetooth Communicator system, which works flawlessly with the DOMAIN helmet. A special Helmlink™ Bluetooth® peripheral pod replaces the side and rear accessory covers.
SAFETY WARNING: Before using any helmet communication system, familiarize yourself with local, regional, national and international requirements for using communication devices while operating a vehicle for all territories you plan to travel through.
ONE-IMPACT RULE — AFTER ANY SEVERE IMPACT, THE HELMET MUST BE REPLACED. Helmets are designed to protect against one impact only. The helmet is designed so that the head is protected in an impact through damage to the shell and EPS liner. In any hard impact on the helmet, the area of the liner that takes the impact absorbs and dissipates the force, which compresses it and damages the liner. The damage may not be visible. Even if no VISIBLE damage is found on the shell, the helmet will be unfit for use after one impact. After an impact, replace the helmet with a new one and dispose of the old one, even if it appears undamaged.
HEARING: wearing any helmet reduces a person’s ability to hear. A person who uses a helmet should be aware that their ability to hear the surrounding world is reduced. Not knowing that hearing is reduced when wearing a helmet may lead to an accident, which in turn can cause injury or death.
A helmet has a limited service life and must be replaced when typical signs of wear appear, such as changes in shape, cracks, corrosion, abrasion or other signs of material wear that could lead to helmet damage.
The advice to replace your helmet every five years is based on the consensus of most helmet manufacturers. Glues, resins and other materials used in helmet production can affect the liner material over time. Skin oils, sweat and cosmetics, as well as normal wear of the materials, also lead to deterioration of the helmet liner. In addition, petroleum-based products in cleaners, paints, fuel and other commonly used substances can damage the materials used in helmet production, potentially impairing their performance. Experience shows that helmet quality standards are revised every five years. Combined with statistics on improvements in materials, design and manufacturing methods, this leads to the conclusion that it is in the owner’s interest to replace their helmet at least every five years. After buying a new helmet, dispose of the old one so that it is not reused. Do not sell or give away your old helmet, even if it is undamaged. Over time, the protective layer in a helmet takes the shape of the rider’s head. Such a helmet cannot provide another rider with a comparable level of protection.
No personal protective equipment can protect against all types of injuries in a crash or fall from a motorcycle. No riding gear can provide complete protection against impacts or abrasion in a crash or fall from a motorcycle. Motorcycling is inherently dangerous, and using this helmet cannot prevent injury or death. Even at low speed, a crash can result in serious injury or death. By using this helmet, the user assumes all risks associated with this activity that may result in injury or death. The user hereby waives all claims and lawsuits against Icon® Motosports, Lemans Corporation and J-TECH Corp in the event of death or injury resulting from the use of Icon Motosports products.