Podolsk,
14 Lobacheva st.
To contact page
RU EN
Tue-Fri 11:00-20:00
Sat-Sun 11:00-17:00
Mon - Closed
GRINGO SV Purple
Metallic neo retro motorcycle helmet
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
GRINGO SV Purple
RUB 38,200

The Gringo SV takes the classic aesthetic we revived a decade ago to a new level. The result is a comfortable modern helmet with world-class function and style.

  • The molded ABS plastic shell is lightweight and highly impact resistant.
  • The evolved Gringo S shell styling includes front, side and rear vents to improve internal airflow, moisture wicking and cooling.
  • The new dual-layer impact-absorbing expanded polystyrene (EPS) inner liner effectively absorbs and dissipates impact energy without reducing comfort and ergonomics.
  • Adjustable brow vents let you regulate airflow inside, cooling and drying your head.
  • A molded urethane front bumper dissipates energy in frontal impacts.
  • The chin strap has Lycra fleece skin contact zones for comfort, plus a secure D-ring retention system with a red pull tab for quick removal and fitting.
  • The CE-certified molded polycarbonate visor has an anti-fog, scratch-resistant coating for durability and safety.
  • Strong visor mounting hardware allows riding with the visor open at low speeds for more cooling airflow.
  • The anodized aluminum washers and stainless steel visor hinge screws can be swapped for colored ones to personalize the helmet’s look (hinge hardware kits sold separately).
  • The removable, replaceable comfortable inner liner and cheek pads are made of Lycra fleece and foam padding to absorb and evaporate sweat.
  • The new BioFoam inner panel and vented polyester liner maximize airflow around the head, keeping you cool and comfortable.
  • Molded ear pockets in the EPS impact liner fit external audio accessories and headsets.
  • Meets US DOT FMVSS No. 218 / ECE R22.06 certified.

Let’s be honest — motorcycle helmets look great, and you’d like to keep yours looking like new for as long as possible. Over many years of practice we have worked out several effective ways to do this, and we are happy to share them.

CLEANING THE HELMET

We strongly do not recommend using solvents, carburetor cleaner, brake fluid or any other substances in the cans, tins and bottles lying around your garage, including unlabeled ones, to clean your helmet. Chemicals and strong solvents can seriously damage the materials the helmet is made of — please don’t do that to your helmet!

WASHING THE LINER

  • Remove the inner comfort liner as described in the “Removing the comfort liner” section of the ICON helmet manuals.
  • Soak the liner in a mild solution of baby shampoo and wash it gently.
  • Rinse several times in clean water until all traces of soap are gone.
  • Let the water drain and air-dry the liner, then reinstall it in the helmet.

* Never wash or dry the liner in a washing machine or dryer.

CLEANING THE OUTER SURFACE (GLOSS HELMETS)

  • Cover the helmet with a towel soaked in hot water and leave it for at least 5 minutes to soften dried-on bugs (don’t skip this step!).
  • Take a fresh towel soaked in a dishwashing liquid solution and remove dirt from the helmet surface.
  • Use a third, dry towel to wipe the helmet and remove water marks.

CLEANING THE OUTER SURFACE (RUBATONE MATTE HELMETS)

  • Cover the helmet with a towel soaked in hot water and leave it for at least 5 minutes to soften dried-on bugs (don’t skip this step!).
  • Remove bugs and dirt with light blotting motions. Use the soft inner side of the included helmet bag or a clean microfiber cloth.

POLISHING THE OUTER SURFACE

  • For helmets with a gloss finish, use an aerosol car wax (sold in any auto store).
  • As for matte parts, we sincerely hope you are not planning to polish a matte surface.

STORING THE HELMET

Protecting your helmet during long-term storage is definitely a good idea. Keep the helmet in the special bag included. Store it in a safe, dry place out of direct sunlight.

CLEANING THE VISOR

The visor surface must be cleaned very carefully to avoid scratches. Place a clean, warm, damp, soft cloth over the outside of the visor for at least 5 minutes to soften dried bugs and dirt (don’t skip this step!). Then gently clean the visor with a clean soft cloth, warm water and mild soap. After that, wipe the visor with a clean soft cloth dampened with clean water to remove soap residue. Dry the visor by gently wiping it with a clean soft cloth.

Never use solvents, window or glass cleaners, or any other chemical cleaners to clean the visor.
Do not apply decals, tape or stickers to the visor.

If your visor has an anti-scratch or anti-fog coating, keep in mind that household cleaners (such as glass cleaners, all-purpose sprays, furniture polish) can leave unwanted marks and in some cases damage the visor itself.

Do not use any cleaners or detergents on the inside of the visor. Using anything other than a clean soft or microfiber cloth and water to gently wipe the inside of the visor can damage or reduce the effectiveness of the anti-fog coating.

Protect the visor when it is not fitted to the helmet. Store the visor in a dry, safe place, away from direct sunlight and extremely high or low temperatures. Make sure the visor cannot be scratched, damaged by impact or otherwise deformed, is not under heavy objects and is not stored near fuel or solvents. We recommend storing the visor in a soft microfiber bag or pouch.

If your helmet has an internal drop-down visor, be sure to follow the same instructions, as they also apply to the internal drop-down visor.

GOOD ADVICE

Although a helmet is hard and has a very strong and reliable construction, it requires careful handling. Dropping a helmet on asphalt or another hard surface can significantly impair its functionality. The user should be aware that an impact may cause damage that is invisible to the eye.

GOOD ADVICE FROM ICON

The riding gear manufacturer ICON Motosports warns: when taking part in activities that require a helmet on your head, it is strongly recommended to avoid hitting your head on anything whatsoever. If you suspect reduced helmet functionality, or after ANY impact during use, replace the helmet. We guarantee it will cost less.

  • DO NOT PULL THE HELMET OFF BY GRABBING THE VISOR OR SPOILER LIKE A HANDLE. THESE PARTS ARE DESIGNED TO BREAK AWAY IN A CRASH.
  • BEFORE REMOVING THE VISOR SIDE PLATE, REFRESH YOUR KNOWLEDGE BY REREADING THE “VISOR REMOVAL/INSTALLATION” SECTION OF THE HELMET MANUALS.
  • DO NOT LEAVE THE HELMET ON THE FUEL TANK. GASOLINE FUMES CAN DAMAGE THE HELMET LINER THAT DISSIPATES IMPACT ENERGY IN A CRASH.

No motorcycle helmet in the world can protect against ALL possible impacts. For your safety, you need to choose a helmet that fits correctly. For maximum head protection, the helmet must fit snugly and follow the shape of your skull as closely as possible. To work properly, the helmet must be securely fastened under the chin.

MEASURING YOUR HEAD

Wrap a flexible measuring tape around your head at its widest point above the eyebrows and ears.

Using this measurement, find your size in the size charts below according to the helmet brand and model:

ICON AIRFLITE / DOMAIN / THRESHOLD

BILTWELL LANE SPLITTER / GRINGO S SV

THOR FLEET / SECTOR 2

Shell 2XS XS S M L XL 2XL 3XL
Circumference cm 51–52 53–54 55–56 57–58 59–60 61–62 63–64 65–66

 

ICON ULTRAFLITE / AIRFRAME PRO

THOR REFLEX

Shell XS S M L XL 2XL 3XL
Circumference cm 54–55 55–56 57–58 58–59 60–61 62–63 64–65

 

ICON AIRFORM

Shell XS S M L XL 2XL 3XL
Circumference cm 53–54 55–56 57–58 58–59 60–61 62–63 64–65

 

HEAD SHAPE

Skull shape in the horizontal plane is just as important as circumference. To determine your head shape, put on a balaclava (it will flatten your hair) and take a photo of your head from above, or ask someone to assess it. Round head — width and length are almost the same, it fits into a circle. Intermediate oval head — slightly longer than it is wide, the most common skull shape, it fits into a regular oval. Long oval — noticeably longer than it is wide, it fits into a narrow oval.

Different helmet models are made for different skull shapes — keep this in mind when choosing a helmet:

  • ICON helmets: Airflite, Airform are made for an intermediate oval head. The Airform feels slightly wider than the Airflite. The Airflite also fits a long oval head well.
  • ICON helmets: Ultraflite are made for an intermediate oval head, but they also fit a long oval head well, as well as a head shaped between round and oval, but not a round one. The Ultraflite feels slightly wider than the Airflite. Overall, the Ultraflite is a more adaptable helmet and fits a wider variety of intermediate oval and long oval heads than the Airflite.
  • ICON helmets: Threshold are made for an intermediate oval head. They fit similarly to the Ultraflite, meaning they are more adaptable and suit a wider variety of heads that deviate from the intermediate oval toward both round and long oval.
  • ICON helmets: Domain — for a round head (Round Oval), but it also fits an intermediate oval head well.
  • ICON helmets: Airframe Pro — for intermediate oval and long oval heads.
  • BILTWELL helmets: Gringo SV, Gringo S and Gringo — for round (Round Oval) and intermediate oval heads.
  • BILTWELL helmets: Lane Splitter — for round (Round Oval) and intermediate oval heads.
  • THOR helmets: FLEET fit round (Round Oval) and intermediate oval heads very well.
  • THOR helmets: REFLEX are made for an intermediate oval head, but they also fit a long oval head well.
Head shapes: round oval, intermediate oval, long oval

If you can’t determine your head shape (this sometimes happens), it is most likely an intermediate oval, because a round head shape (equal length and width) is the most obvious.

If your head shape doesn’t match the helmet shape, you need to go one or two sizes up, depending on how big the difference in skull oval is. In that case the liner will fit your skull unevenly and not over its whole area, which has a negative effect on impact energy absorption as well as on the helmet’s noise insulation.

NOTE: The helmet’s inner pads compress with use — keep this in mind when trying it on. The helmet should fit snugly and should not press painfully on your skull. The pressure on your cheeks can be quite strong, and they may be squeezed. The cheek pads are the thickest and compress the most.

We don’t believe you need to wear a helmet for a while to get used to it. A helmet chosen correctly by size and shape fits comfortably and snugly right away — proven by hundreds of customers! The only thing that may be uncomfortable is a tight entry when taking the helmet off and putting it on. Over time the pads at the entry will soften, and the helmet will be much easier to put on and take off. Focus on how your head feels inside the helmet!

1/1

Biltwell Gringo SV

16 176
Recommend
Magazine Wheelie: Trick Theory Magazine ZX636 03-04 Stunt Bike Build Stunt Show with Girls Baldini Stunt Show