На войне говорят, что твоя собственная обувь может убить тебя или спасти. Мы задались целью выпустить мотоботы, способную помочь вам одержать стопроцентную, чистую победу в борьбе со стихиями. В ботинках Patrol Water proof ваши ноги будут сухими, и вам будет удобно и комфортно даже при самых неблагоприятных погодных условиях. Верхняя часть из усиленной кожи, внутренние бронированные вставки на высокой точке щиколоток и специальная система шнуровки «ghilley» для плотного надежного облегания с минимальным «люфтом» в ненужных местах и свободой движения — в нужных. В нижней части ботинок предусмотрен внутренний высокопрочный стальной геленок для надежной опоры, подошва выполнена из прочной резины с отличными противоскользящими характеристиками, отлично подходящей как для ходьбы пешком, так и для езды на мотоцикле. Водонепроницаемые ботинки Patrol Waterproof – это новый стандарт мотоциклетной обуви, в сравнении с которым будут оценивать все остальное.
Use a mild suede/leather cleaner only on the leather parts on the outside of the boots. Safe cleaners for genuine leather can be found at most shoe repair shops or branded leather goods stores. To clean other outer parts of the boot (buckles, overlays or sole), wipe them with a cloth dampened with clean water. Please note: even after using mild, safe leather cleaners, the leather on your boots may darken. So always test each new cleaner on an inconspicuous area to avoid unpleasant surprises. Do not use solvents or other aggressive substances to clean the boots. Do not use hair dryers or other heaters to dry the boots after cleaning.
Regularly treat the outer leather parts of the boots with a quality conditioner that is safe for genuine suede/leather. Apply the genuine suede/leather conditioner only to the leather areas. Do not apply leather conditioner to the inside of the boot, zippers, hook-and-loop surfaces or sole. Safe cleaners for genuine leather/suede can be found at most shoe repair shops or branded leather goods stores.
Store your boots in a dry, well-ventilated place, away from direct sunlight and other sources of heat. Make sure nothing can crush, crease or damage them, and do not place heavy objects on them. When storing the boots, make sure their weight does not rest on a few separate points but is distributed as evenly as possible. If the boots are damp after use, dry them in a ventilated room at room temperature before storing them; do not use hair dryers or other heaters to speed up the process.
When transporting the boots, do not leave them in a closed car for long periods, and make sure they are not exposed to excessively high or low temperatures. Make sure they cannot be crushed, hit, creased or otherwise mechanically damaged, and that no heavy objects are placed on them during transport.
D3O® is the number one choice for motorcycle body armor and protective gear that delivers outstanding impact protection, comfort and flexibility. From MotoGP, to off-road and the street, our innovative range of CE Level 1 and Level 2 certified products are trusted and sold worldwide by leading motorcycle brands.
Motorcycle armor works by absorbing the shock from an impact. Rather than the impact striking your body with full force, motorcycle armor helps take the brunt of the impact and dissipate the force to reduce its severity. The impact protection material found in motorcycle armor is what makes this possible, and the materials used in and around the armor (such as leather in a jacket, or woven kevlar in motorcycle pants) help to resist abrasion.
D3O® motorcycle armor offers the most advanced impact protection available on the market. Based on non-Newtonian principles, D3O® materials are soft and flexible in their resting state, but stiffen under an impact to disperse the energy of the force across the surface area of the product. D3O® armor is durable and designed to withstand multiple impacts, only needing to be replaced when showing wear and tear. This is in contrast to other armor which can flatten out over time, quickly losing its ability to protect effectively.
The design of motorcycle armor is also key to ensure it gives maximum levels of protection and comfort. Each piece of D3O® armor is designed to fit specific parts of the body comfortably, including the back, chest and limbs, such as knees and elbows. This gives these areas optimum coverage and reduces the likelihood of injury.
When looking at your D3O® impact protection or the label in your motorcycle armor, you're likely to see EN (European Norm) numbers. EN standards are used to help demonstrate that a product meets the requirements of the PPE Regulation (EU) 2016/425 or PPE Regulation (2016/425) as brought into UK Law and amended.
EN1621 relates specifically to motorcycle armor. EN1621-1:2012 relates to limb protection, EN1621-2:2014 to back protection, and EN1621-3:2018 to chest protection. All of these can be tested to meet Level 1 or Level 2 protection. Level 1 offers a good level of impact protection, and Level 2 meets the criteria for racing, and can therefore withstand higher force impacts.
EN13594:2015 is specific to motorcycle glove protection. To pass, the product must meet the following criteria: Innocuousness, ergonomic requirements, sizing and cuff length, restraint, tear strength, seam strength, impact abrasion resistance, cut resistance, and impact protection of knuckles.
EN13634:2015 applies to motorcycle footwear. The criteria that need to be met include: protection, ergonomic characteristics, innocuousness, mechanical properties, marking and information for users.
Whole garment testing is reviewed against EN 17092:2020. This is separate from the EN standards indicated above. While impact protection is necessary to meet EN 17092:2020, the armor also needs to be tested on its own to ensure it's fit for purpose and meets Level 1 or Level 2 requirements.
EN17092 is tested to 5 levels of criteria. The testing looks at the different zones on the body and how well the armor protects those areas under force. Garments certified to EN17092 and featuring D3O® impact protection are therefore some of the safest and most well-tested motorcycle armor items available on the market. You can be guaranteed regulated, independent testing when looking for these EN standards.
The AAA-A garment classification is important to check and understand so you make sure you're getting the correct level of protection.
AAA-A classes are certified in accordance with EN 17092:2020. The materials are tested under lab conditions to assess how much speed and force they can withstand before tearing — this is the measure of abrasion resistance. This then allows the AAA-A classification to be assigned.
The main difference between the classes is the abrasion, seam strength and cut resistance of the garment. The more you go towards AAA, the better the materials and construction.
D3O works with many partner brands to provide market-leading impact protection armor in motorcycle clothing.
D3O® motorcycle impact protection is offered in two levels, Level 1 and Level 2. Choose the right level of protection depending on the type of riding you're doing, as well as taking into consideration the technical features you prefer to have while riding.
D3O offers a range of CE/UKCA armor to protect your chest, back and limbs whilst riding to minimize the likelihood of injury from riding accidents.